PILINGS · TOPSAIL BEACH, NC
Pilings in Topsail Beach, NC
Pressure-treated and CCA pilings driven to refusal — for coastal docks, pier rebuilds, bulkhead repair, and freshwater-lake builds inland. Based ten minutes from the Topsail Beach waterfront.
Driven to RefusalCCA & PT AvailableBarge-Mounted DriverPender County
QUICK ANSWER
- Who builds pilings in Topsail Beach, NC?
- Intracoastal Installs builds pilings in Topsail Beach, NC. We are a family-owned, nc gc #100980 marine contractor based 312 Olde Point Loop, Hampstead. Call (910) 612-6107 for a free Topsail Beach site visit.
TOPSAIL BEACH CONDITIONS
Why Topsail Beach pilings are different
Topsail Beach docks are sound-side only — ocean-side construction is not permitted. We size pilings for the shallow draft and run a CAMA general permit plus the town review.
Sound-side construction only — no ocean-side dock permits
Shallow draft requires careful piling depth surveys
Hurricane-rated framing required (Florence reconstruction zone)
EVERY PILINGS BUILD COVERS
What is included
- Bottom probe and refusal estimate before quoting
- 8x8, 10x10, or 12x12 pressure-treated pilings
- Marine-rated CCA treatment available
- Barge-mounted hydraulic pile driver
- Cut-off, cap, and clean-up included
TOPSAIL BEACH COVERAGE MAP
We work the entire Topsail Beach waterfront
FAQ
Pilings in Topsail Beach, NC — questions answered
>
Do you build pilings in Topsail Beach, NC?
Yes. We build pilings throughout Topsail Beach and the surrounding Pender County area. Our shop is at 312 Olde Point Loop in Hampstead, NC — a short drive to every Topsail Beach bulkhead. Call (910) 612-6107 for a free site visit.
>
What does a pilings cost in Topsail Beach, NC?
Free site evaluation. Most piling jobs fall in the $300 – $900 per piling range installed, depending on size and access. Permit cost varies by Pender County CAMA review. We provide a written, itemized estimate within one business day.
>
Do you handle CAMA permits for Topsail Beach projects?
Yes. Topsail Beach falls under Pender County CAMA general permits, and we walk every application through with you. A floating dock needs about 18 inches of water at low tide. We probe the bottom on every site and recommend a fixed pier or hybrid if depth is borderline.
>
What size piling do I need?
Light residential docks use 8x8. T-head piers and lift pilings usually need 10x10. Bulkheads and commercial docks step up to 12x12.
>
PT or CCA?
PT (pressure-treated) is the standard. CCA is the older marine-grade treatment and lasts longer in salt water but is special order.
ALSO BUILT IN TOPSAIL BEACH
Other services we offer in Topsail Beach
NEARBY
Pilings in nearby cities
Free Topsail Beach pilings estimate
We will visit your Topsail Beach bulkhead, walk the shoreline, and provide a written, itemized estimate within one business day.