BOAT LIFTS · WRIGHTSVILLE BEACH, NC
Boat Lifts in Wrightsville Beach, NC
Cradle, beam, and PWC lifts sized to your boat and your dock — installed across Wrightsville Beach, NC and on freshwater lakes inland. Based ten minutes from the Wrightsville Beach waterfront.
Up to 24,000 lbUSA-Made MotorsStainless CablesNew Hanover County
QUICK ANSWER
- Who builds boat lifts in Wrightsville Beach, NC?
- Intracoastal Installs builds boat lifts in Wrightsville Beach, NC. We are a family-owned, nc gc #100980 marine contractor based 312 Olde Point Loop, Hampstead. Call (910) 612-6107 for a free Wrightsville Beach site visit.
WRIGHTSVILLE BEACH CONDITIONS
Why Wrightsville Beach boat lifts are different
Banks Channel and Motts Channel run hard at full tide. We size lift cradles and pier framing for the current load every Wrightsville Beach job sees.
Strong tidal currents in Banks Channel and Motts Channel
Boat-lift demand is the highest on our coast
Tight lot layouts require careful dock geometry
EVERY BOAT LIFTS BUILD COVERS
What is included
- Lift sizing based on dry weight + 25% safety
- Galvanized I-beam cradle or 4-post beam lift
- 316 stainless cables and pulleys
- 110V or 220V USA-made motors
- Remote control + auto-stop upper limit
WRIGHTSVILLE BEACH COVERAGE MAP
We work the entire Wrightsville Beach waterfront
FAQ
Boat Lifts in Wrightsville Beach, NC — questions answered
>
Do you build boat lifts in Wrightsville Beach, NC?
Yes. We build boat lifts throughout Wrightsville Beach and the surrounding New Hanover County area. Our shop is at 312 Olde Point Loop in Hampstead, NC — a short drive to every Wrightsville Beach bulkhead. Call (910) 612-6107 for a free site visit.
>
What does a boat lifts cost in Wrightsville Beach, NC?
Free site evaluation. Most 4-post 10,000 lb lifts fall in the $7,500 – $14,000 range installed. PWC lifts start at $3,500. Permit cost varies by New Hanover County CAMA review. We provide a written, itemized estimate within one business day.
>
Do you handle CAMA permits for Wrightsville Beach projects?
Yes. Wrightsville Beach falls under New Hanover County CAMA general permits, and we walk every application through with you. We measure twice and lay out the dock on paper before any piling drives. Most Wrightsville Beach lots have less than 30 feet of frontage.
>
How big a lift do I need?
Take your boat dry weight, add fuel and gear, then add 25%. A 22-foot center console with a 250 hp outboard usually needs a 10,000 lb lift.
>
Can you add a lift to my existing dock?
In most cases yes. We inspect the pilings and framing first; if they are sound, we bolt the lift right to them.
ALSO BUILT IN WRIGHTSVILLE BEACH
Other services we offer in Wrightsville Beach
NEARBY
Boat Lifts in nearby cities
Free Wrightsville Beach boat lifts estimate
We will visit your Wrightsville Beach bulkhead, walk the shoreline, and provide a written, itemized estimate within one business day.