PILINGS · WRIGHTSVILLE BEACH, NC
Pilings in Wrightsville Beach, NC
Pressure-treated and CCA pilings driven to refusal — for coastal docks, pier rebuilds, bulkhead repair, and freshwater-lake builds inland. Based ten minutes from the Wrightsville Beach waterfront.
Driven to RefusalCCA & PT AvailableBarge-Mounted DriverNew Hanover County
QUICK ANSWER
- Who builds pilings in Wrightsville Beach, NC?
- Intracoastal Installs builds pilings in Wrightsville Beach, NC. We are a family-owned, nc gc #100980 marine contractor based 312 Olde Point Loop, Hampstead. Call (910) 612-6107 for a free Wrightsville Beach site visit.
WRIGHTSVILLE BEACH CONDITIONS
Why Wrightsville Beach pilings are different
Banks Channel and Motts Channel run hard at full tide. We size lift cradles and pier framing for the current load every Wrightsville Beach job sees.
Strong tidal currents in Banks Channel and Motts Channel
Boat-lift demand is the highest on our coast
Tight lot layouts require careful dock geometry
EVERY PILINGS BUILD COVERS
What is included
- Bottom probe and refusal estimate before quoting
- 8x8, 10x10, or 12x12 pressure-treated pilings
- Marine-rated CCA treatment available
- Barge-mounted hydraulic pile driver
- Cut-off, cap, and clean-up included
WRIGHTSVILLE BEACH COVERAGE MAP
We work the entire Wrightsville Beach waterfront
FAQ
Pilings in Wrightsville Beach, NC — questions answered
>
Do you build pilings in Wrightsville Beach, NC?
Yes. We build pilings throughout Wrightsville Beach and the surrounding New Hanover County area. Our shop is at 312 Olde Point Loop in Hampstead, NC — a short drive to every Wrightsville Beach bulkhead. Call (910) 612-6107 for a free site visit.
>
What does a pilings cost in Wrightsville Beach, NC?
Free site evaluation. Most piling jobs fall in the $300 – $900 per piling range installed, depending on size and access. Permit cost varies by New Hanover County CAMA review. We provide a written, itemized estimate within one business day.
>
Do you handle CAMA permits for Wrightsville Beach projects?
Yes. Wrightsville Beach falls under New Hanover County CAMA general permits, and we walk every application through with you. We measure twice and lay out the dock on paper before any piling drives. Most Wrightsville Beach lots have less than 30 feet of frontage.
>
What size piling do I need?
Light residential docks use 8x8. T-head piers and lift pilings usually need 10x10. Bulkheads and commercial docks step up to 12x12.
>
PT or CCA?
PT (pressure-treated) is the standard. CCA is the older marine-grade treatment and lasts longer in salt water but is special order.
ALSO BUILT IN WRIGHTSVILLE BEACH
Other services we offer in Wrightsville Beach
NEARBY
Pilings in nearby cities
Free Wrightsville Beach pilings estimate
We will visit your Wrightsville Beach bulkhead, walk the shoreline, and provide a written, itemized estimate within one business day.